COMPACTMETAL TS

Trapezoidal sheet ROOF short rail SYSTEM

  •  years product warranty
  •  CE marked

SIMPLE.
STABLE.
PROVEN.

COMPACTMETAL TS stands for maximum simplified PV mounting on trapezoidal sheet metal roofs. The short rails in 80 mm or 150 mm length are screwed onto the high bead of the trapezoidal sheet without cutting and without pre-drilling. The Click module clamps are mounted directly onto the short rail.

The PV installation on commercial and industrial roofs requires mounting systems that impress through great flexibility and stability with low material and labor costs. At the same time, adjustments to the existing roof should be minimized so that the roof functions are preserved in the best possible way.

  • On steel and aluminum trapezoidal sheets
  • Minimal material and installation effort
  • Adapters for better ventilation
  • Variable due to modular system
  • For high wind and snow loads
  • Suitable for all framed PV modules
  • Few components, minimum logistical effort

TS08 short rail

Direct mounting with module clamps on 80 mm short rails minimizes material costs and labor time. Full safety and fast assembly at the best price.

 

TS15 short rail

The slightly longer short rail offers more mounting tolerance as well as the possibility to achieve a higher load capacity per mounting by using 3 instead of the usual 2 metal sheet screws. This short rail is optimized for use on trapezoidal sheets with thin sheet thickness.

TS08/TS15 short rail

Direct mounting with module clamps on 80 mm short rails minimizes material costs and labor time. Full safety and fast mounting at the best price.

The slightly longer short rail offers more mounting tolerance as well as the possibility to achieve a higher load capacity per mounting by using 3 instead of the usual 2 metal sheet screws. This short rail is optimized for use on trapezoidal sheets with thin sheet thickness.

CLE10/CLM10 module clamps

The PV modules are held in place using the universal click clamp with integrated grounding pins. The multi-system clamp is height-adjustable between 30 - 46 mm and can be conveniently clicked into place. The end clamp has a length of 60 mm. The clamps are also available in black.

Video

MSS 6x25 Thin Sheet Screw

By using only self-tapping screws, the installation of the PV mounting system is fast, easy and efficient.

EL05/EL10 Height adapter

The height adapter increases the distance between module frame and trapezoidal sheet metal from 18 mm to 50 mm (EL05) or 100 mm (EL10). Recommended for installations in locations with year-round sunny or hot climates, where the improved ventilation (cooling of the modules) can be expected to significantly increase yields.

PS/PM/PL tilt adaptEr

The PS, PM and PL tilt adapter (3 different heights) gives the modules an additional tilt angle relative to the roof. This results in a noticeable increase in yield on very flat and/or east or west sloping roofs.

LSP Fuse kit

SELECT YOUR SYSTEM

Products Total: 7
Tilt angle
PV-module alignment
Alignment
TS

CompactMETAL TS

  • Tilt angle: Roof parallel
  • PV-module alignment: Landscape
  • Alignment: South
TS EL

CompactMETAL TS EL

  • Tilt angle: Roof parallel
  • PV-module alignment: Landscape
  • Alignment: South
TS EL PS/PM/PL

CompactMETAL TS EL PS/PM/PL

  • Tilt angle: 5°, 10°
  • PV-module alignment: Landscape
  • Alignment: East/West

DOWNLOADS

  • Intake form COMPACTMETAL
    DE EN IT
  • Assembly instruction COMPACTMETAL TS
    DE EN

ProjeCTS

Football Stadium Washington D.C.
COMPACTMETAL628 kWpWashington D.C., USA
Washington Tennis & Education Foundation
COMPACTMETAL743,4 kWpWashington D.C., USA
Guntamatic heating technology
COMPACTMETAL1.236 kWpGrieskirchen, Austria
Arched metal roof
COMPACTMETAL80 kWpPiemonte, Italy
Curved trapezoidal metal sheet roof
COMPACTMETAL120 kWpVerona, Italy
Curved corrugated roof
COMPACTMETAL3,4 MWFidenza, Italy
Show more projects

OTHER SOLUTIONS

Flat roof

COMPACTFLAT // Substructure for PV systems on flat roofs