COMPACTMETAL TS

Trapezoidal sheet ROOF short rail SYSTEM

Year product warranty
SolarPTL CERTIFIED to UL 2703
Fast installation

SIMPLE.
STABLE.
PROVEN.

COMPACTMETAL TS stands for maximum simplified PV mounting on trapezoidal sheet metal roofs. The short rails in 3.15" (80 mm) or 5.90" (150 mm) lengths are screwed onto the crowns of the trapezoidal sheet without cutting and without pre-drilling. The Click module clamps are mounted directly onto the short rail.

The PV installation on commercial and industrial roofs requires mounting systems that impress through great flexibility and stability with low material and labor costs. At the same time, adjustments to the existing roof should be minimized so that the roof functions are preserved in the best possible way.

On steel and aluminum trapezoidal sheets
Minimal material and installation effort
Adapters for better ventilation
Variable due to modular system
For high wind and snow loads
Suitable for all framed PV modules
Few components, minimum logistical effort

TS08 short rail

Direct mounting with module clamps on 3.15" (80 mm) short rails minimizes material costs and labor time. Full safety and fast assembly at the best price.

TS15 short rail

The slightly longer short rail offers more mounting tolerance as well as the possibility to achieve a higher load capacity per mounting by using 3 instead of the usual 2 metal sheet screws. This short rail is optimized for use on trapezoidal sheets with thin sheet thickness.

TS08/TS15 short rail

Direct mounting with module clamps on 3.15" (80 mm) short rails minimizes material costs and labor time. Full safety and fast mounting at the best price.

CLE10PLUS/CLM10 module clamps

The PV modules are held in place using the universal click clamp with integrated grounding pins. The multi-system clamp is height-adjustable between 30 - 46 mm and can be conveniently clicked into place. The end clamp has a length of 80 mm.

Video

MSS 6x25 Thin Sheet Screw

By only using the specifically designed, high-treaded, self-tapping metal screws, the installation of the PV mounting system is fast, easy and efficient.

EL05/EL10 Height adapter

The height adapter increases the distance between module frame and trapezoidal metal sheet metal sheet crowns from 3/4" / 18 mm to 2" / 50 mm (EL05) or 4" / 100 mm (EL10). Recommended for installations in locations with year-round sunny or hot climates, where the improved ventilation (cooling of the modules) can be expected to significantly increase yields.

PS/PM/PL tilt adaptEr

The PS, PM and PL tilt adapter (3 different heights) gives the modules an additional tilt angle relative to the roof. This results in a noticeable increase in yield on very flat and/or east or west sloping roofs.