SolutionsCOMPACTPITCH

Compact and tested installation on PV modules on pitched roofs.

Download Installation Manuals

With few primary components, the CompactPITCH product family offers an outstanding price-performance ratio. The simple installation of the smart system saves time and resources while offering an inexpensive system price.

COMPACTPITCH X

Tiled roof

COMPACTPITCH X

The new COMPACTPITCH X system with triangular profile rails offers better structural load-bearing capacity with less material than common square rail systems.

The associated module clamps are available with a click mount for faster assembly, and with slot nut as a less expensive alternative.

The clamps are available with or without earthing pins. The profile rails are offered in 4.2 and 6.2 meter lengths. Alternatively, clamps and profile rails are also available in black.

Technicaldata

Description
Rail-based mounting system for framed or frameless PV modules on tiled and corrugated roofs
Applications
On pan tile, crown tile, shingle, corrugated and sandwich roofs
Module dimensions
Any length and width available, frame height 30-50 mm or frameless
Mounting Tilt
Parallel to roof
Space to the ground
At least 100 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 12 m, along continuous rail, otherwise unlimited
Min. field size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; rail arrangement single layer horizontal/vertical or cross connection; roof hooks, hanger bolts
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, EN AW 6005 T6, stainless steel 1.4301 / A2-70; seals made of EPDM

COMPACTPITCH X - Lightweight. Stable. Intelligent.

Corrugated fiber cement / Corrugated metal / Trapezoidal sheet metal / Sandwich

COMPACTPITCH X - Lightweight. Stable. Intelligent.

Compact and tested installation on PV modules on tiled roofs.

The new COMPACTPITCH X system with triangular profile rails offers better structural load-bearing capacity with less material than common square rail systems.

The associated module clamps are available with a click mount for faster assembly, and with slot nut as a less expensive alternative.

The clamps are available with or without earthing pins. The profile rails are offered in 4.2 and 6.2 meter lengths. Alternatively, clamps and profile rails are also available in black.

Technicaldata

Description
Rail-based mounting system for framed or frameless PV modules on tiled and corrugated roofs
Applications
On pan tile, crown tile, shingle, corrugated and sandwich roofs
Module dimensions
Any length and width available, frame height 30-50 mm or frameless
Mounting Tilt
Parallel to roof
Space to the ground
At least 100 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 12 m, along continuous rail, otherwise unlimited
Min. field size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; rail arrangement single layer horizontal/vertical or cross connection; roof hooks, hanger bolts
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, EN AW 6005 T6, stainless steel 1.4301 / A2-70; seals made of EPDM

COMPACTPITCH TS

COMPACTPITCH TS

The TS is our trapezoidal short rail with the best price-performance ratio. The rail is pre-assembled with sealing tape and delivered including two thin tapping screws (chip free and self-tapping) with gaskets.

Technicaldata

Description
Direct attachment mounting system without self-supporting rails for framed PV modules on metal roofs
Applications
On trapezoidal sheet metal, folded sheet metal and sandwich roofs
Module dimensions
Any length and width available, frame height 30-50
Mounting Tilt
Parallel to roof or slightly elevated
Inter-Row Spacing
Depending on roof pitch (only elevated systems)
Space to the ground
At least 35 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 6 m, along joint clamp, otherwise unlimited
Max. array size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; attachment elements with self-tapping / self-drilling screws, seam clamps
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, stainless steel A2-70; seals made of EPDM

COMPACTPITCH T1 KLIP-LOK

COMPACTPITCH T1 KLIP-LOK

The T1 clamp for KLIP-LOK is a clamping device specially suited for KLIP-LOK metal roofs. Like the TS system, the KLIP-LOK clamp uses no rails, giving it the best price-performance ratio for this roof type.

Technicaldata

Description
Direct attachment mounting system without self-supporting rails for framed PV modules on metal roofs
Applications
On trapezoidal sheet metal, folded sheet metal and sandwich roofs
Module dimensions
Any length and width available, frame height 30-50
Mounting Tilt
Parallel to roof or slightly elevated
Inter-Row Spacing
Depending on roof pitch (only elevated systems)
Space to the ground
At least 35 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 6 m, along joint clamp, otherwise unlimited
Min. field size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; attachment elements with self-tapping / self-drilling screws, seam clamps
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, stainless steel A2-70; seals made of EPDM

COMPACTPITCH T

COMPACTPITCH T

The T rail is our versatile standard solution for transverse and longitudinal mounting of the modules. The sealing tape is pre-installed on the rail and delivered including four thin tapping screws and a pre-assembled module clamp. Available in 250 mm and 400 mm lengths.

Technicaldata

Description
Direct attachment mounting system without self-supporting rails for framed PV modules on metal roofs
Applications
On trapezoidal sheet metal, folded sheet metal and sandwich roofs
Module dimensions
Any length and width available, frame height 30-50
Mounting Tilt
Parallel to roof or slightly elevated
Inter-Row Spacing
Depending on roof pitch (only elevated systems)
Space to the ground
At least 35 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 6 m, along joint clamp, otherwise unlimited
Min. field size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; attachment elements with self-tapping / self-drilling screws, seam clamps
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, stainless steel A2-70; seals made of EPDM

COMPACTPITCH T+

COMPACTPITCH T+

T+ stands for our tilted trapezoidal rail. The modules have a tilt of between 5° and 13° to the roof surface depending on installation type. The rail is pre-assembled with sealing tape and delivered including four thin tapping screws and a pre-assembled module clamp.

Technicaldata

Description
On trapezoidal sheet metal, folded sheet metal and sandwich roofs
Applications
On trapezoidal sheet metal, folded sheet metal and sandwich roofs
Any length and width available, frame height 30-50
Mounting Tilt
Parallel to roof or slightly elevated
Inter-Row Spacing
Depending on roof pitch (only elevated systems)
Space to the ground
At least 35 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 6 m, along joint clamp, otherwise unlimited
Min. field size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; attachment elements with self-tapping / self-drilling screws, seam clamps
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, stainless steel A2-70; seals made of EPDM

COMPACTPITCH T KLIP-LOK elevated

COMPACTPITCH T KLIP-LOK elevated

The new T KLIP-LOK ELEVATED is a new variation of the existing T+ system, specially suited for KLIP-LOK system roofs.

The additional tilt of 5° improves the self-cleaning properties of the module to provide better output.

Technicaldata

Description
Direct attachment mounting system without self-supporting rails for framed PV modules on metal roofs
Applications
On trapezoidal sheet metal, folded sheet metal and sandwich roofs
Any length and width available, frame height 30-50
Mounting Tilt
Parallel to roof or slightly elevated
Inter-Row Spacing
Depending on roof pitch (only elevated systems)
Space to the ground
At least 35 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 6 m, along joint clamp, otherwise unlimited
Min. field size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; attachment elements with self-tapping / self-drilling screws, seam clamps
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, stainless steel A2-70; seals made of EPDM

COMPACTPITCH T1

COMPACTPITCH T1

The T1 clamp is our solution for all common standing seam roofs. With just two components, the clamp can be mounted very easily and quickly, and is delivered including a module clamp with earthing pins.

Technicaldata

Description
Direct attachment mounting system without self-supporting rails for framed PV modules on metal roofs
Applications
On trapezoidal sheet metal, folded sheet metal and sandwich roofs
Any length and width available, frame height 30-50
Mounting Tilt
Parallel to roof or slightly elevated
Inter-Row Spacing
Depending on roof pitch (only elevated systems)
Space to the ground
At least 35 mm
Distance from roof edge
No minimum distance, roof areas F and G according to EN 1991-1-4 can be used
Max. Roof Slope
60°, or steeper with suitable PV modules
Max. array size
Approx. 6 m, along joint clamp, otherwise unlimited
Min. field size
1 x 1 Module
Windload
2 (kPa)
Snowload
2
Dimensioning / stability verification
Software-supported based on European / national standards
On-site requirements
Sufficient structural load-bearing capacity for the roof structure and building structure must be ensured on site. The General Terms and Conditions and Warranty Conditions and User Agreement apply.
Module approval
Typically not required
Components
Module clamps with/without earthing pin; attachment elements with self-tapping / self-drilling screws, seam clamps
Materials
Load-bearing connecting components made of aluminum EN AW 6063 T66, stainless steel A2-70; seals made of EPDM

MatchingDownloads

AssemblyVideos

Pitched roof System X crown tile
Pitched roof System X concrete tile
Pitched roof System TS trapezoidal short rail
Pitched roof System T trapezoidal standard rail
Pitched roof System T + trapezoidal elevated
Pitched roof System T1 Klip Lock

Planning &Development

UnbeatableAdvantages

  • Fully developed product

    The system combines optimal on site handling and high efficiency.

  • Short installation times

    Assembly is very simple, guaranteeing fast installation times.

  • Rust-free parts

    All supporting structures are made of aluminum or stainless steel.

  • Pre-mounted components

    All primary components are delivered pre-assembled from the factory.

  • Lightweight and short parts

    The design of our systems does not use any long or heavy components.

  • Comprehensive documentation

    Comprehensive documentation is available online for assembly, with descriptions and pictures.

  • Planning support by specialists

    Competent project support from our own industry specialists.

  • High-performing product portfolio

    Well-developed, tested quality in all product families.

  • Verifiable, tested safety, 25 year warranty

    Strict tests and quality inspections for maximum safety.

  • 3D supported calculation and structural software

    The Aerotool can also be used by customers.

  • Short installation times thanks to pre-assembled components

    Components can be installed without pre-assembly.

  • Comprehensive technical documentation

    Detailed documentation on components and assemblies.

  • AEROCOMPACT® partner program

    Take advantage of the benefits of strategic partnership.

  • High delivery capabilities

    Our own warehouse and high production capacities ensure short reaction times.

  • Compact transportation containers

    Improved transportation performance with slim components and optimized packaging.

  • Pre-mounted components

    Components can be installed without pre-assembly.

  • Engineering service

    Advising from internal AEROCOMPACT® industry specialists

  • Extensive marketing tools

    Sales support from communication specialists.

We areAEROCOMPACT

Curious what we can do for you?

Can we help you with additional information, an offer, or a tender text? Please let us know!

Inquiry form

I am interested in
your company
Your company
You are
Your information
Send
Send

European headquarters

USA headquarters