COMPACTFLAT S

The bracket-based flat roof system

  •  year product warranty
  •  Wind tunnel tested
  •  CE marked
AEROCOMPACT CompactFLAT S10 Key-Visual

RELIABLE. SIMPLE. UNIQUE.

With the COMPACTFLAT S system, we revolutionized the world of PV substructures. We challenged the standard rail substructures on the market and designed substructures based on aluminum brackets, making a name for ourselves worldwide.

The low weight and compactness of the brackets make them easy to store and transport. The aerodynamic design has excellent structural properties and requires significantly less ballasts than other systems on the market. Due to the small contact surface of the brackets an ideal water drainage is achieved.

  • Short assembly times
  • Low transport costs
  • Few components
  • Maximum safety due to extensive wind tunnel tests
  • Incl. pre-assembled PES protection pad
AEROCOMPACT CompactFLAT S05AEROCOMPACT CompactFLAT S05
AEROCOMPACT CompactFLAT S05 BackAEROCOMPACT CompactFLAT S05 Back
AEROCOMPACT CompactFLAT S05 DetailAEROCOMPACT CompactFLAT S05 Detail

S Brackets and connectors South

AEROCOMPACT CompactFLAT S BRACKETSAEROCOMPACT CompactFLAT S BRACKETS

S BRACKETS AND Connectors East/WEst

AEROCOMPACT CompactFLAT S BRACKETS OWAEROCOMPACT CompactFLAT S BRACKETS OW

CLE10PLUS/CLM10 module clamps

The PV modules are held in place using the universal click clamp with integrated grounding pins. The multi-system clamp is height-adjustable between 30 - 46 mm and can be conveniently clicked into place. The end clamp has a length of 80 mm. The clamps are also available in black.

Video

Ballast trays

This system variant with ballast trays, available in various sizes, is mainly used in areas with high wind loads and roofs with low point loads. The main advantages of this installation variant are, on the one hand, the additional ballast that can be installed per module and, on the other hand, the even distribution of the concentrated load on the roofing. The ballast tray can also be used for ballasting on gravel roofs by putting the gravel into the ballast trays.

Ballast securing bracket

With the additional ballast securing bracket, which fits perfectly with our ballast trays, the ballast stones are secured against slipping off the tray and ideally distributed.

Protection pads

To prevent damage to the roof cladding, additional protection pads can be placed under the ballast bodies and the stirrups. The protection pad is made of needle felt.

AEROCOMPACT Bautenschutzmatten ohne KlebestreifenAEROCOMPACT Bautenschutzmatten ohne Klebestreifen

Alpine brackets

For a certain snow load, which is calculated project-related by our proprietary design software AEROTOOL, our additional alpine brackets are used. The brackets reinforce the module on the long side by means of an additional clamping point. Overlong modules can be protected from bending by clamping on the long side, regardless of snow loads.  

AEROCOMPACT CompactFLAT S ALPINEAEROCOMPACT CompactFLAT S ALPINE

Roof anchor

AEROCOMPACT offers a sophisticated hybrid solution for roofs that cannot withstand the extra weight of a photovoltaic system. The combination of roof attachment points and ballast reduces the overall weight of the installation. This option can also be used in areas with seismic activity to prevent the system from shifting due to the effect of earthquakes.

AEROCOMPACT CompactFLAT S10 DachankerAEROCOMPACT CompactFLAT S10 Dachanker

Wind deflector

The system component is used to reduce the wind load. Depending on the system, the wind deflector can be fastened with just one screw and is available in various lengths.

Ballast blocks can be placed on the brackets without any fasteners. With our proprietary design and engineering software AEROTOOL it is possible to calculate exactly how much weight has to be placed on each bracket.

This system variant with ballast trays, available in various sizes, is mainly used in areas with high wind loads and roofs with low point loads. The main advantages of this installation variant are, on the one hand, the additional ballast that can be installed per module and, on the other hand, the even distribution of the concentrated load on the roofing. The ballast tray can also be used for ballasting on gravel roofs by putting the gravel into the ballast trays. With the additional ballast securing bracket, the ballast stones are secured against slipping from the tray and ideally distributed.

AEROCOMPACT offers a sophisticated hybrid solution for roofs that cannot withstand the extra weight of a photovoltaic system. The combination of roof mounting points and ballast reduces the overall weight of the installation. This option can also be used in areas with seismic activity to prevent the system from shifting due to the effect of earthquakes.

AEROCOMPACT CompactFLAT S10 DachankerAEROCOMPACT CompactFLAT S10 Dachanker

CABLE MANAGEMENT

The cable management solution for string cabling of rows is UL certified and available as an accessory.

Micro inverter holder

With the new update, a UL certified micro inverter and optimizer mount is now available.

ASSEMBLY VIDEO | COMPACTFLAT S05
ASSEMBLY VIDEO | COMPACTFLAT S10
ASSEMBLY VIDEO | COMPACTFLAT S15
ASSEMBLY VIDEO | COMPACTFLAT S PLUS EAST/WEST
COMPACTFLAT S05 | ALPINE
COMPACTFLAT | BALLAST TRAY LONG | CONNECTOR
COMPACTFLAT | BALLAST TRAY LONG | FRONT BRACKET
COMPACTFLAT | BALLAST TRAY LONG | END BRACKET
COMPACTFLAT | CABLE MANAGEMENT
COMPACTFLAT | DIRECT BALLASTING

SELECT YOUR SYSTEM

Products Total: 7
Tilt angle
Secured with
Shading angle
Alignment
S05

CompactFLAT S05 – 178 mm row spacing

  • Tilt angle:
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: > 20°
  • Alignment: South
S05

CompactFLAT S05 – 335 mm row spacing

  • Tilt angle:
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: < 20°
  • Alignment: South
S10

CompactFLAT S10 – 380 mm row spacing

  • Tilt angle: 10°
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: > 20°
  • Alignment: South
S10

CompactFLAT S10 – 527 mm row spacing

  • Tilt angle: 10°
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: < 20°
  • Alignment: South
S15

CompactFLAT S15 – 571 mm row spacing

  • Tilt angle: 15°
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: > 20°
  • Alignment: South
S15

CompactFLAT S15 – 790 mm row spacing

  • Tilt angle: 15°
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: < 20°
  • Alignment: South
S10 PLUS

CompactFLAT S10 PLUS – 182 mm row spacing

  • Tilt angle: 10°
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: none
  • Alignment: East/West
S10 PLUS

CompactFLAT S10 PLUS – 350 mm row spacing

  • Tilt angle: 10°
  • Secured with: Ballast Blocks, Gravel/River Rocks, Anchor attachment
  • Shading angle: none
  • Alignment: East/West

DOWNLOADS

ProjeCTS

No news found.

OTHER SOLUTIONS