COMPACTMETAL TM

Standing seam clamp kits

years product warranty
CE marked

CONSISTENT. EFFECTIVE. Simple.

With the standing seam kit series COMPACTMETAL TM, the rail-less installation of PV modules is possible on practically all standing seam roof types. Standing Seam Clamps with the pre-mounted short rail are designed to direct mount the PV modules.

Our standing seam clamps are designed to be installed quickly and easily without damaging penetration of the interlocking roof, and still withstand immense pressure and suction loads caused by wind and snow.

For high snow and wind loads
Extremely high holding forces
Module-bearing clamp
Portrait assembly mode
Penetration-free assembly
Form-fitting connection

Direct clamping

The installation of modules in landscape mode (landscape format) is easily possible with the help of direct mounting on the clamps. This variant can be planned in AEROTOOL.

Clamping on carrier profile

The installation of modules in portrait mode (portrait format) is easily possible using the X40 ⁄ X50 mounting rail from the COMPACTPITCH modular system. The rail is attached directly to the standing seam clamp using the XPN multi connector provided for this purpose.

CLE10/CLM10 module clamps

The PV modules are held in place using the universal click clamp with integrated grounding pins. The multi-system clamp is height-adjustable between 30 - 46 mm and can be conveniently clicked into place. The end clamp has a length of 60 mm. The clamps are also available in black.

Video

TMDS08 double-seam clamp

Penetration-free fastening on the craftsman's double standing seam, optimal form fit due to convex/concave preformed fixing screws.

TMM08 Angle and snap-seam clamp

Penetration-free fastening on the hand-crafted angled standing seam and snap seam profiles such as Nordic Klick Falz®1, etc. Optimum form fit due to convex/concave preformed fixing screws.

TMR08 Round-seam clamp

Penetration-free fastening to round seam roofs such as BEMO®2, Kalzip®3, Aluform®4 or RIB-ROOF Evolution®5. Optimal form fit due to convex/concave preformed fixing screws.

TMRD08 Concealed-fix clamp small

Two-piece and form-fitting clamp, specially developed for system sliding seam roofs such as RIB-ROOF 465®5 and GBS®6.

TMK1508 Concealed-fix clamp medium

Two-piece and form-fitting clamp, specially developed for system sliding seam roofs such as Domitec®6, KLIP-LOK 406®7, SAFLOK 410®8, or similar.

TMK2008 Concealed-fix clamp large

Two-piece and form-fitting clamp, specially designed for system sliding seam roofs such as KLIP-LOK 980 Optima®7, KLIP-LOK 700®7, WeatherClip 655®9, WeatherClip 700®9, or similar.

Trademark reference

Registered trademarks, by company: 1 DS Stahl GmbH; 2 BEMO SYSTEMS GmbH; 3 Kalzip GmbH; 4 Aluform System GmbH & Co. KG; 5 Zambelli Holding GmbH; 6 DOMICO Dach-, Wand- und Fassadensysteme KG; 7 BLUESCOPE STEEL LIMITED; 8 Safintra South Africa (Pty) Ltd; 9 DMI Building Products (M) Sdn Bhd.; 10 PREFA Aluminiumprodukte GmbH; 11 RHEINZINK AUSTRIA GMBH; 12 Astron Buildings GmbH

EL05 HEIGHT ADAPTER

The height adapter increases the distance between module frame and trapezoidal sheet metal from 18 mm to 50 mm. Recommended for installations in locations with year-round sunny or hot climates, where the improved ventilation (cooling of the modules) can be expected to significantly increase yields.

Cross connector

The cross connector bracket can be used to connect mounting rails together, allowing for additional alignments and positions of the PV modules. The cross connector is also available in black.

Mounting rails X40 and X50

The aluminum profile rail is the central construction element, which offers a high static load capacity due to its optimized shape. The X40 and X50 mounting rails are also available in black.

End cap for mounting rails

For the neat covering of the open mounting rails as well as for the aesthetic enhancement of the PV system, we offer the optional end caps made of UV-stabilized polyamide.

CLP-U UNIVERSAL CABLE CLIP

The universal cable clip makes it easy to attach cables. It can be attached either to the module frame or to the rails.

WCL8-10 wire clamp

The wire clamp ensures a secure, stable connection and high conductivity for integrating the system into the lightning protection system. They offer flexible application options and ensure long-term reliability and corrosion resistance.