COMPACTMETAL TS

Trapezoidal sheet ROOF short rail SYSTEM

  •  years product warranty
  •  CE marked

SIMPLE.
STABLE.
PROVEN.

COMPACTMETAL TS stands for maximum simplified PV mounting on trapezoidal sheet metal roofs. The short rails in 80 mm or 150 mm length are screwed onto the high bead of the trapezoidal sheet without cutting and without pre-drilling. The Click module clamps are mounted directly onto the short rail.

The PV installation on commercial and industrial roofs requires mounting systems that impress through great flexibility and stability with low material and labor costs. At the same time, adjustments to the existing roof should be minimized so that the roof functions are preserved in the best possible way.

  • On steel and aluminum trapezoidal sheets
  • Minimal material and installation effort
  • Adapters for better ventilation
  • Variable due to modular system
  • For high wind and snow loads
  • Suitable for all framed PV modules
  • Few components, minimum logistical effort

TS08 short rail

Direct mounting with module clamps on 80 mm short rails minimizes material costs and labor time. Full safety and fast assembly at the best price.

 

TS15 short rail

The slightly longer short rail offers more mounting tolerance as well as the possibility to achieve a higher load capacity per mounting by using 3 instead of the usual 2 metal sheet screws. This short rail is optimized for use on trapezoidal sheets with thin sheet thickness.

TS08/TS15 short rail

Direct mounting with module clamps on 80 mm short rails minimizes material costs and labor time. Full safety and fast mounting at the best price.

The slightly longer short rail offers more mounting tolerance as well as the possibility to achieve a higher load capacity per mounting by using 3 instead of the usual 2 metal sheet screws. This short rail is optimized for use on trapezoidal sheets with thin sheet thickness.

TSE15 RAISED SHORT RAIL

Short rail with a height of 80mm to maintain roof clearances, ensure rear ventilation, and allow the installation of optimizers. The elevated short rail can be installed without additional large assembly effort - only a bit extension is required. The appropriate bit extension is suggested in the Aerotool during project planning so that it is always available on site.

CLE10/CLM10 module clamps

The PV modules are held in place using the universal click clamp with integrated grounding pins. The multi-system clamp is height-adjustable between 30 - 46 mm and can be conveniently clicked into place. The end clamp has a length of 60 mm. The clamps are also available in black.

Video

MSS 6x25 Thin Sheet Screw

By using only self-tapping screws, the installation of the PV mounting system is fast, easy and efficient.

LSP Safety bolt Kit

SELECT YOUR SYSTEM

Products Total: 7
Tilt angle
PV-module alignment
Alignment
TS

CompactMETAL TS

  • Tilt angle: Roof parallel
  • PV-module alignment: Landscape
  • Alignment: South
TS EL

CompactMETAL TS EL

  • Tilt angle: Roof parallel
  • PV-module alignment: Landscape
  • Alignment: South
TS EL PS/PM/PL

CompactMETAL TS EL PS/PM/PL

  • Tilt angle: 5°, 10°
  • PV-module alignment: Landscape
  • Alignment: East/West

DOWNLOADS

OTHER SOLUTIONS