COMPACTGROUND GS

The BRACKET system for open spaces

years product warranty
Wind tunnel tested
CE marked

flexible. adaptable. fast.

The COMPACTGROUND GS system is the flexible and cost-effective solution for open space projects where pile driven systems are not economical – for example on landfill sites or for small project sizes. Thanks to simple logistics, universal usability and durable components, the system is resolute in every project phase.

The GS system offers a flexible and cost-effective solution for open space projects of any size. The ground pegs are inexpensive and easy to drive in with a hammer drill and can be easily removed from the ground in the event of obstacles thanks to the embossed external thread. The hot-dip galvanized surface of the stirrups and ground pegs ensures corrosion resistance. Compared to conventional ground screws, the cost-effective ground pegs in combination with ballast trays offer the possibility of optimally distributing fastening points and ballast in line with wind loads, therefore achieving ideal positional stability. Thanks to the optimized design, each module can now be nailed, which saves material and costs. Two nail lengths – 800 mm to prevent frost heave, 450 mm for landfills and ballast trays - offer flexible fastening options, even for the most difficult conditions.

For the most difficult ground conditions
Optimal for smaller project sizes
Flexible & Tailored
Quick installation
Reduced stock holding

GS 10 PLUS Middle and end clamp

Module middle and end clamp for frame height 30 - 50 mm. Earthing pins for potential equalization. Length: 80 mm, completely pre-assembled.

GS 10 PLUS front bracket

Elevation on open spaces with an inclination of 10°, 400 mm ground clearance and 3 pre-assembled press-in nuts.

GS 10 PLUS middle bracket

Elevation on open spaces, two-sided, with an inclination of 10°, 400 mm ground clearance and 6 pre-assembled press-in nuts.

GS 10 PLUS connector

Elevation on open spaces, two-sided, with an inclination of 10°, 400 mm ground clearance and 6 pre-assembled press-in nuts.

Open Spaces ballast tray

The ballast tray is available in lengths of 450 mm and 900 mm.

GS system ground nail

Soil nail for anchoring system brackets in the ground. Available in lengths of 450 mm and 800 mm.

The GS system with 10° east/west orientation secures position with ballast or a hybrid solution of ground nails and ballasting. Depending on the project requirements, two variants of nails (800 mm to prevent frost heave, 450 mm for waste disposal sites) and two options for ballast trays are available. This allows maximum flexibility to be combined with optimum stability.

SDSMAX17 Ground nail adapter

The adapter facilitates installation with an impact drill.

CLP-U UNIVERSAL CABLE CLIP

The universal cable clip makes it easy to attach cables. It can be attached either to the module frame or to the rails.

OPTIMIZER CLAMP

Our new optimizer clamp is an innovative new development that focuses on the essentials: easy handling, quick installation and maximum compatibility with all AEROCOMPACT systems.

Download Datasheet