Large-format roof tiles are quick to install and are therefore becoming increasingly common on roofs. For you, when installing a PV system, this means that with a hook length of 109.6 mm, the standard hook isn’t always long enough to clear the tile cleanly. Every improvised solution costs you time on the roof.
The XT-R 2.0 LONG has a hook length of 140.5 mm, making it about 31 mm longer than the standard version. This allows you to safely cover even large tile formats. The installation process remains the same: align the hook, click the rail into the quick-release clamp, and secure the base plate with two screws. So if you’re familiar with the XT-R 2.0, you can get started right away.
VISIT THE COMPACTPITCH XT-R 2.0 PRODUCT PAGE
Standard or Long?
For standard-sized clay and concrete roof tiles, use the XT-R 2.0; for large-format roof tiles, use the XT-R 2.0 LONG. The opening dimension, height adjustment, and minimum distance from the roof surface (100 mm) are the same for both. If you’re not sure, your PV consultant can help.

KEY BENEFITS AT A GLANCE:
- 140.5 mm hook length for large-format roof tiles
- Five degrees of freedom and an opening width ranging from 54 to 78 mm for precise alignment
- Base plate height-adjustable in three stages
- Integrated quick-release clamp for the rails and mounting with two screws
- One-person installation with just one tool
- Aluminum and A2-70 stainless steel
Two versions
- With base plate: Item No. 705305
- Without base plate: Part No. 705345
AVAILABLE FOR DELIVERY AND PLANNING IMMEDIATELY
You can plan the XT-R 2.0 LONG as usual inAEROTOOL. In Germany and Austria, it’s alsoavailable in AERO.GO , our planning app for sloped roofs. Just enter a few roof parameters, and in about a minute you’ll receive the structural analysis and the corresponding installation plan.
